
Kindly answer the questions in the box mentioned below:
1. Name the part of the drilling machine marked as
‘X’ in figure?
A Jaws B Chuck C Bevel pinion D Small handle 2 Drill chucks are fitted on the drilling machine
spindleby means of a.... A drift fitted B arbor fitted C knurling ring fitted D pinion and key fitted 3 Which drilling machine is suitable for drilling more
number of holes in different location without disturbing the job setting? A Pillar drilling machine B Radial drilling machine C Bench drilling machine D Electric hand drilling machine 4 The taper shank are held on the machine by means of... A vice B drift C chucks D sleeves 5 When the taper shank in the drill is bigger than the
machine spindle, the device to hold the drill is a... A Drill drift B Drill sleeve C Taper socket D Chuck and key 6 What is the use of drift? A Drawing a drill location B Fixing chuck on the machine spindle C Removing a broken drill from the work D Removing the drill from the machine spindle 7 Which tool used for removing taper shank drill from
socket? A Slot B Drift C Tang D Sleeve 8 Which angle of drill prevent the friction of tool? A Helix angle B Point angle C Rake angle D Clearance angle 9 What is called the angle of flute in the drill? A Lip angle B Web angle C Rake angle D Cutting angle 10 The clearance angle of a drill is between... A 3° to 5° B 8° to 12° C 12° to 20° D 15° to 20°